What we can put in your tender package — and what each document actually proves.
Issued with every shipment
| Document | What it covers |
|---|---|
| Mill certificates | Steel grade and heat number traceability (Q345B / S355) |
| Weld procedure & welder qualification | WPS/WPQR records for structural welds |
| Galvanising thickness report | Coating thickness to ISO 1461 |
| Trial assembly report | Panel match, hole alignment, sequence marking |
| Design / load test report | Structural check to the project load class |
| Packing list & container plan | Parts per container, sequenced to erection |
Quality system
Fabrication is controlled under an ISO 9001 quality system, with dimensional checks at panel jig stage, after welding and after galvanising. Third-party inspection (SGS, BV, TÜV or a client-nominated inspector) can be arranged at the factory.
Standards we fabricate to
- AASHTO LRFD / HS20-44 and HS25 load classes
- BS 5400 load cases where specified
- ISO 1461 hot-dip galvanising
- Project-specific standards on request — send the specification clause
