Rigid Frame Steel Truss Bridge Temporary Modular Bridge Heavy Loading Capacity

Steel Truss Bridge Description:

Introduction of the steel truss bridge:

The steel truss bridge is a structural system between beams and arches. It is a structure in which a bent upper beam structure and a pressure-bearing lower column are integrated together. Due to the rigid connection between the beam and the column, the beam is unloaded due to the flexural rigidity of the column. The entire system is a compression-bending structure as well as a thrust structure.

According to the different position of the bridge floor, it is divided into upper bearing steel truss bridge that the bridge floor is located in the upper part of the main truss and lower bearing steel truss bridge which the bridge floor is located in the lower part of the main truss.

Bridge Deck: The bridge deck is the roadway or platform that sits on top of the truss structure.

Abutments and Piers: Steel truss bridges are supported by abutments at each end and piers in the middle, which provide vertical support to the bridge.

The structure composition of rigid truss beam bridge: Main girder, Bracing, Bridge deck system, Bridge floor

(1) Main girder

It is the main load-bearing structure and bears vertical loads.

The main truss is composed of upper chord, lower chord and belly rod. The belly bar is divided into diagonal bar and vertical bar.

Nodes are divided into large nodes and small nodes.

Pitch refers to the distance between nodes.

(2) Bracing

1. Classification: longitudinal connection and horizontal connection.

2. Function: Connect the main truss, make the bridge span structure become a stable space structure that can withstand a variety of lateral loads.

3. The longitudinal connection system is divided into upper horizontal longitudinal connection system and lower horizontal longitudinal connection system. The main function is to withstand the transverse horizontal load, transverse wind, lateral rocking force and centrifugal force acting on the bridge span structure. In addition, the transverse support chord, reducing its free length outside the plane.

4. The transverse connection is divided into bridge frame and crosslink. The main function is to increase the torsional stiffness of steel girder. Properly adjust the uneven force of the two main stringer or two longitudinal links.

(3) Bridge deck system

1. Composition: the longitudinal beam, beam and the connection between the longitudinal beam.

2. Way of force transmission: the load first acts on the longitudinal beam, and then from the longitudinal beam to the beam, and then from the beam to the main truss.

(4) Bridge deck

The bridge deck is the part for vehicles and pedestrians to walk on. The form of the deck is similar to that of steel beam Bridges and combined beam bridges.

Geometric characteristics of the main truss:

Economy, simple structure, conducive to standardization and easy to manufacture and install.

The main truss categories:

Triangular truss: Triangular truss structure is simple, the design is fixed, easy to install and manufacture.

Diagonal bar truss:

Many bar specifications.

Many specifications and large internal force of the vertical rod.

All are large nodes.

The K-shaped truss:

The shear force of the same node is borne by two diagonal rods, which are small and short in section.

The bar has many specifications, many nodes, short intersections, and many crossbar beams and connections. For small and medium-sized spans, the structure is complex.

For large spans, the rods are short, light and suitable for mounting and dismounting Bridges.

Double-vented bar truss:

The same internode shear force is borne by two diagonal rods, which are small and short in section.

It is used for large span, short compression inclined rod, which is favorable for buckling stability.

The small section of the inclined rod makes the number of connecting pins on the joint plate less, and it is easy to arrange the joint.

Features of steel truss bridges:

Truss Configuration

Versatile Span Lengths

High Strength-to-Weight Ratio

Application of the steel truss bridge:

Generally used for urban bridges or highway viaducts and overpasses with small spans, medium and small span reinforced concret, long span prestressed reinforced concrete, medium and small span straight-leg rigid frames (gate-style) and inclined leg rigid frames, large Span T-shaped rigid frame, continuous rigid frame.

Advantages of the steel truss bridge:

Sustainable Material: Steel is a highly recyclable material, and the use of steel truss bridges promotes sustainability in bridge construction. Steel components can be recycled at the end of a bridge's life, reducing the need for new raw materials and minimizing waste generation. The energy efficiency of steel production processes further enhances the environmental benefits of steel truss bridges.

Ease of Inspection and Maintenance: Steel truss bridges generally offer easy access for inspection and maintenance activities. The open truss structure allows for visual inspection of the individual members, facilitating the identification of potential issues. Maintenance and repair tasks can be performed more efficiently due to the accessibility of the structural elements, resulting in reduced maintenance costs and extended bridge service life.
 

Evercross Steel Bridges Overview :